8.5mm Aluminium Panel Trim ASTM Standard Electrophoresis White

Panel Decoration Aluminium Trim UV Board Wall Protection Tile Corner

Application

A. Extruded Aluminum Shapes: ASTM B 221, 6063-T6 .050” +/-.005 “

B. Mechanical Fasteners: Aluminum, stainless steel or other non-corrosive Material: compatible with aluminum trim.

C. All profiles are 10 foot long unless otherwise indicated

Feature

Extruded aluminum with durable finish.

Aluminum Trim outside corner,Aluminum Trim inside corner,Aluminum Trim flat divider,Aluminum Trim edge molding 8' length.

Paint & Powder Coating: BS 6496 (1984)

Specification for powder organic coatings for application and stoving to aluminium alloy extrusions,sheet and pre-formed sections for external architectural purposes, and for the finish on aluminium alloy extrusions, sheet and preformed sections coated with powder organic coatings.

Use

Polyester powder coated finish External applications Fusion bonded polyester powder coated surfaces will enjoy many years of good service if regularly maintained. For external applications, suggested cleaning intervals will vary between once every three months in harsh industrial or marine environments and up to once yearly in rural atmospheres. After removing any grease or oil deposits with a white spirit solution, use a mild diluted detergent to wash over and rinse with cold clean water. Dry off with a soft cloth. Abrasive cleaning agents or materials should not be used as surface scratching may occur. Internal applications After initial cleaning a regular wipe over with a soft cloth, to remove finger and dirt deposits, is all that is normally required to maintain good surface appearance.

Specification

ASTM Aluminium Panel Trim

Electrophoresis Aluminium Panel Trim

8.5mm white aluminum corner trim

8.5mm Aluminium Panel Trim ASTM Standard Electrophoresis White Images